************************************************************ Due to office moving, all orders we receive between 11 Sep - 19 Sep will be dispatched on 20 Sep 2022 ************************************************************
Cart 0
4x Drum Reset Fuse for Samsung CLP 320 CLP 325 N W CLX 3180 3185 CLT-R407 R407

ABPS

4x Drum Reset Fuse for Samsung CLP 320 CLP 325 N W CLX 3180 3185 CLT-R407 R407

£8.99

New

Great
Customer Support
Fast Shipping
100% Satisfaction Guaranteed
DESCRIPTION

Why change if they are not worn out. Reset, reuse and save huge $$$.


Use your soldering tool to install this reset fuse quickly and your drum unit will work for another cycle easily.


Do not have soldering tools? or Would like to have easier / quicker solution? Please click here to visit our shop and search your printer model. You will easily find "Peel and Stick" type reset chip.

​​​​​​​



Why our solution is the No. 1 choice for you? Simple reasons are below


  • Best Price solution : We are the main worldwide official distributor of this product. You may find same item from other sellers. They buy from us and sell it to you for more expensive price without reselling agreement. Buy directly from and save your time and money.
  • This is a Quad fuse pack. Thus, you can reset 4x individual drum units or reset four times on one drum unit.
  • Better Compatibility solution : Not like others' , our kit(s) work on both starter and retail version drum.
  • Home & Office Friendly Solutoin : NO MORE TONER LEAKING, thus, No mess.
  • It comes with detailed instruction manual (English Version) and installation video guide below.



Please check the video guides & the FAQs before purchasing.

Video Guides
FAQs
  • Does it reset TONER level? : NO

Some customers get confused and think that the Drum Reset chip will somehow reset all counters through the drum unit. Actually it is not. The drum reset chip will only reset the drum counter. For the same manner, the belt reset chip and fuser reset kit will only reset belt counter and fuser counter respectively. If you are looking for the TONER COUNTER RESET solution, these are not the correct products and please find the right product from other listings.

 

  • Does it work? YES.

See the hundreds and thousands feedbacks we have received from our customers.

 

  • Is there anything I should know before purchasing? YES

The part that you intend to reset the counter of must be in good working condition  or had been providing good quality prints until it was locked by the counter. If the part has any physical defects, this reset kit will not improve the printing defects  or quality at all. If you are having printing quality problems or error codes  other than the "replace part”  light or message, this kit will not help. 

Please note that all brand names and trademarks are the property of  their respective owners and are used for descriptive purposes only. This  product is a compatible product, not an O.E.M. Product.

 

  • How does it work?

Based on our experience, usually the drum units and other parts such as transfer belt and fuser unit are physically strong enough to work for one or  two more cycles of its stated page limit. However, almost all laser printers  have built-in counter system which will generate a message to the user to order  new part and eventually lock up the printer (with “Replace Drum”  or “Replace  Part” message) when it reaches its stated printing limit regardless the  physical condition of the parts. Even though the physical condition of the  parts are still good enough and the printing quality is still acceptable, the  users had no options to keep using the existing parts but had to change. This is a huge waste of time, money and environmentally not friendly. When replacing the built-in counter chip/part, the printer will recognize the used part as a new one and your printer will keep working with the same parts.

 

Other sellers also sell reset kits but it is not as easy as our products. It may not work on bundle/starter parts. Also, it will either involve huge amount of toner leaking or risk of frying up the motherboard. That is why most of the sellers do not show their actual reset products before selling.

 

In contrast, we show all items before selling. We also show video guides on how to use our products. So, customer will know exactly how to use our product before purchasing. Our product will work on retail version parts and starter version parts, too. Our sticker type reset chips will never require any tools to install. Just peel & stick like a sticker. Our cable type products may require 2-4 screws opening, but will not involve toner leaking.

 

  • What is the main benefit of using this product? HUGE SAVINGs

By re-using the parts, you will save huge and unnecessary cost. The reset kit installation is as easy as or even quicker and easier than replacing the parts, thus you will save your time. Finally, re-using the parts will reduce the amount of landfill, thus, it will save environment.

 

  • Can I re-use the reset chips/kits? NO

This limitation is not made by us. Our reset circuits(special fusible link) work in exactly same way as the counter circuits on the new drum/belt/fuser. The counter is not saved on the parts but on the printer motherboard. The new drum / belt / fuser has the special fusible link to generate the NEW PART signal at the first installation. Once the signal is detected, the printer motherboard will reset the relevant counter on its counter systems and cut the fusible link on the part. Then, the new part will never be able to generate the NEW PART signal anymore. That is why the nearly new parts which is used for only one page will not be able to reset the page counter at all when they are installed onto another printer. For the same manner, when our chip is detected, the printer motherboard will reset the relevant the counter on itself then cut the fusible link on our reset product. Thus, it cannot be used again.

 

  • When do I actually need to replace the parts?

     How many cycles can I re-use the parts? 

There is no strict guide line for this. When the printing quality becomes not acceptable or if the part is physically worn out and broken, then, you need to change the part. Thus, how many cycles you can re-use the parts entirely depends on your printing quality requirement. If you need very clean and sharp business meeting material, you may re-use the parts for 2-3 cycles only. However, if you are happy with some of the printing defects, then, you may not ne


Share this Product


More from this collection