Just Peel & Stick to save huge $$$
- Installation takes just several minutes.
- No Opening Tools Required
- No Soldering Required
- No firmware Hacking
Super easy drum counter reset solution.
Super Easy Drum, Belt and/or Fuser Reset Solution. NO TOOLS REQUIRED, NO FIRMWARE HACKING
Just Peel & Stick to reset the counter (*watch the video guide below)
Why change if they are not worn out. Reset, reuse and save huge $$$. Moreover, our solution is the
- Best Price solution : We are the main worldwide official distributor of this product.
- Simplest and Quickest solution : Just Peel & Stick to reset the drum counter.
- Better Compatibility solution : Our reset kit works on BOTH retail & starter drum.
- Cleanest Solution : No drum opening is required, thus, NO MORE TONER LEAKING
- Home & Office Friendly Solutoin : NO MORE TONER LEAKING, thus, No mess.
- Lowest Human Error Solution : No opening means less chance of breaking the sensitive parts.
- It comes with detailed instruction manual (English version only) and installation video guide.
Please check the Purchase Options, Video Guides & FAQs before purchasing.
- 1x Drum Reset Chip
- 1x ITB Reset Chip
1x Fuser Reset Chip
6x Chips (4x DRM, 1x Fuser, 1x ITB) This kit contains 4x Drum reset chips*, 1x Belt Counter Reset Chip and 1x Fuser counter reset chip. Each chip installatin takes 25 sec to 1 min to complete the installation.
* Drum Reset Chips are not colour specific. Therefore, four drum chips can be used for four different colour drum units or it can be used for one drum units for four times. One reset requires one reset chip. It is NOT reusable.
** Fuser Reset chip can remove ERROR 980 message if the fuser has no physical problem and if the wrapped paper is properly removed.
1. DRUM COUNTER RESET CHIP GUIDE
2. BELT COUNTER RESET CHIP GUIDE
Take your belt unit, upside down and check the undersurface. Even if your belt unit looks a bit different, the way of installation is the same. The example video guide was made with similar series printer and the way of using the belt reset chip is exactly the same.
3. FUSER COUNTER RESET CHIP
The sample printer used in this video is C710 printer model.
The way of resetting the fuser unit on C5100 & C5300 models are very similar to this printer model.
Why should I buy it from this seller? : We are the product designers.
We understand that PRINTING is one of the critical things to keep your business up and running. Customers need to save on unnecessary cost if any alternative solution (like our reset kits) exists but need to make sure it works properly. So, sometimes they need quick and correct support.
If you need any technical support, the best people would be the product designers who has the best knowledge on the product and also understand exactly how the printer model works and what may cause what problems. If you agree with that, then, yes it is the right place to purchase and we are the right supplier you can rely on.
We are not just a reseller. Our engineers DESIGN, MAKE and TEST all of our products. For any reason, if a customer requires any support, our PRODUCT DESIGNERS will provide QUICK SUPPORT directly to the customer. Moreover, all the product designers are highly trained printer engineers and they are more than happy to help cusotmers for any issues on their printers even if the issue is not related to the product sold by us.
- Does it reset TONER level? : NO
Some customers get confused and think that the Drum Reset chip will somehow reset all counters through the drum unit. Actually it is not. The drum reset chip will only reset the drum counter. For the same manner, the belt reset chip and fuser reset kit will only reset belt counter and fuser counter respectively. If you are looking for the TONER COUNTER RESET solution, these are not the correct products and please find the right product from other listings.
- The manufacture's user manual shows that I should change the toner cartridge when replacing the drum unit. Do I need to change the TONER CARTRIDGE when applying the drum counter reset chip? : NO (99.9%) & YES (0.1%)
The drum reset chip works exactly same way as the one in a new drum unit. The manufacture recommend to prepare/change the toner cartridge when a new drum unit is installed. It is because the printer firmware is programmed to assume that the new drum unit is supplied EMPTY. So, when the NEW DRUM signal is detected by the printer, the printer will assume that the drum unit is empty, thus, the printer will try to transfer some toner powder from the toner cartridge to the drum unit, then, reduce the toner level in the toner cartridge accordingly. When you use the drum reset chip, the drum unit is already filled with the toner powder, thus, there will be no toner transfer inside between the toner cartridge and the drum unit. However, the printer does not know the difference whether the NEW DRUM signal is coming from a new drum or from the counter reset chip, thus, the printer will decrease the toner level even though there is no toner transfer. So, if your toner level is low and you would like to reset the drum counter of that colour, there is a small chance that the printer will ask for a new toner cartridge after using the drum reset chip. This is caused by the printer firmware. If you get the REPLACE TONER message after using the drum reset chip, you will get the same message even if you use a new drum unit. That is why the printer manufacture recommend users to prepare a new toner cartridge when replacing the drum unit. The answer is NO (for 99.9%) if your printer does not ask for new toner cartridge. But YES (for 0.1%) if your printer asks for a new toner cartridge after using the drum reset chip.
- Does it work? : YES of course.
See the hundreds and thousands feedbacks we have received from our customers.
- Is there anything I should know before purchasing? : YES
The part that you intend to reset the counter of must be in good working condition or had been providing good quality prints until it was locked by the counter. If the part has any physical defects, this reset kit will not improve the printing defects or quality at all. If you are having printing quality problems or error codes other than the "replace part” light or message, this kit will not help.
Please note that all brand names and trademarks are the property of their respective owners and are used for descriptive purposes only. This product is a compatible product, not an O.E.M. Product.
- How does it work?
Based on our experience, usually the drum units and other parts such as transfer belt and fuser unit are physically strong enough to work for one or two more cycles of its stated page limit. However, almost all laser printers have built-in counter system which will generate a message to the user to order new part and eventually lock up the printer (with “Replace Drum” or “Replace Part” message) when it reaches its stated printing limit regardless the physical condition of the parts. Even though the physical condition of the parts are still good enough and the printing quality is still acceptable, the users had no options to keep using the existing parts but had to change. This is a huge waste of time, money and environmentally not friendly. When replacing the built-in counter chip/part, the printer will recognize the used part as a new one and your printer will keep working with the same parts.
Other sellers also sell reset kits but it is not as easy as our products. It may not work on bundle/starter parts. Also, it will either involve huge amount of toner leaking or risk of frying up the motherboard. That is why most of the sellers do not show their actual reset products before selling.
In contrast, we show all items before selling. We also show video guides on how to use our products. So, customer will know exactly how to use our product before purchasing. Our product will work on retail version parts and starter version parts, too. Our sticker type reset chips will never require any tools to install. Just peel & stick like a sticker. Our cable type products may require 2-4 screws opening, but will not involve toner leaking.
- What are the main benefits of using it?
- QUICK, EASY, SAFE & HUGE SAVINGS in ECO-FRIENDLY way.
By re-using the parts, you will save huge and unnecessary cost. The reset kit installation is as easy as or even quicker and easier than replacing the parts, thus you will save your time. Finally, re-using the parts will reduce the amount of landfill, thus, it will save environment.
- Can I re-use the reset chips/kits? : NO (**otherwise stated)
This limitation is not made by us. Our reset circuits(special fusible link) work in exactly same way as the counter circuits on the new drum/belt/fuser. The counter is not saved on the parts but on the printer motherboard. The new drum / belt / fuser has the special fusible link to generate the NEW PART signal at the first installation. Once the signal is detected, the printer motherboard will reset the relevant counter on its counter systems and cut the fusible link on the part. Then, the new part will never be able to generate the NEW PART signal anymore. That is why the nearly new parts which is used for only one page will not be able to reset the page counter at all when they are installed onto another printer. For the same manner, when our chip is detected, the printer motherboard will reset the relevant the counter on itself then cut the fusible link on our reset product. Thus, it cannot be used again.
- When do I actually need to replace the parts?
- How many cycles can I re-use the parts?
There is no strict guide line for this. When the printing quality becomes not acceptable or if the part is physically worn out and broken, then, you need to change the part. Thus, how many cycles you can re-use the parts entirely depends on your printing quality requirement. If you need very clean and sharp business meeting material, you may re-use the parts for 2-3 cycles only. However, if you are happy with some of the printing defects, then, you may not need to change the parts until the issue becomes really serious. Thus, we would say the parts can be re-used until it is physically broken down or as many cycles as the user wants. Based on our experience, re-using 2-3 cycles would be acceptable on most of cases. But please remember, each and every time you reset the remaining life, you need a new reset kit.
- Does it come with any instruction manual or video guide? YES for BOTH
Our reset kits come with our detailed instruction manual. Also, you can find the video installation guide from this listing. Simply comeback to this listing and play the instruction video.
- Should I wait until my printer shows PART REPLACEMENT message? NO&YES
Regardless the current part life remaining, our product will be reset the remaining life back to 100%. It can be used anytime whenever you want even when the remaining life is above 95%. If you are a printer maintenance engineer and need to reset the counters before you visit the site next time, you can use our product to reset the remaining life back to full. For end-users, as mentioned above the reset kit will work only once and it is not re-usable, thus, for the best saving, it is better to wait until the printer asks for new parts.
- How many pages will our product work for? ONE MORE CYCLE per kit.
The number of pages will depends on the printer model and the manufacture specified part life. if the part life is 30k pages, then our chip will work for 30k pages. If the new part life is 100k pages, then, our chip will work for 100k pages.
- My printer model number has different suffix which is not specified here. Will it work on my printer?
If the manufacture and the model number is listed here (regardless the suffix or options), the reset kit will work on your printer model. Due to eBay's listing title length limit, sometimes we cannot put all available suffixes. The suffix is related to the additional options or functions of the printer. However, the main body, drum unit, belt and fuser units are the same for the same model number printers even with differnt suffixes. So, please disregard the suffix(or options). If the number and manufacture name matches, our chip will work on all of the printer models regardless additional options. For an example, OKI C711N, C711DN and C711WT use the same hardware but DN model has additional duplex tray and WT model support White Toner. They use the same drum, same belt and same fuser units. Thus, our product for C711 model will work on all C711N, C711DN and C711WT models.
Domestic Shipping: All Domestic packages are shipped Ground Shipping For Free (Unless other shipping method was selected on the order)
- We are now shipping to worldwide addresses. All items are shipped from the item location specified.
- International customers are responsible for all duties and taxes, thus, contact your local authority for questions related to the amount of duties or taxes you will be responsible for.
- We ship within one business day of payment.
- Economy FREE shipping takes between 3-5 business days for domestic customers and 7-10 business days for EU customers and 10-25 business days for the rest of world.
- Standard shipping takes between 2-3 business days for customers in EU and US and 7-15 business days for the rest of world.
- Expedited shipping takes between 1-2 business days for domestic delivery and 3-5 business days for the rest of world.
- Due to postal missing issues, we do not accept P.O. BOXES -PLEASE PROVIDE A PHYSICAL ADDRESS
- In the event that you would like to return your purchase, we allow returns that are processed within the defined return date (30 days from the date of delivery). Please contact us for a return authorization and the return shipping address.
- Please contact us for a Return Merchandise Authorization (RMA) number
- We advise you to use a reputable carrier service when returning your goods. Please pack all returns appropriately.
PayPal is our preferred method of payments. It's the quickest, easiest and most secure way to pay for your goods or services online. PayPal offers buyer and seller protection should there be a problem.
If you do not have a PayPal account, to get started and buy your first item with us is very easy. Simply click on the 'Buy It Now' button and follow the eBay checkout steps. Select PayPal as the payment method you then will be given the chance to enter your card details in to PayPal's secure checkout in order to pay for your order. Once the payment has been made, you will then be given the opportunity to make your own PayPal account to make paying for your items in the future very easy.
Should there be a problem with payment please do let us know.
Customer satisfaction is very important to us. If you have any problem with your order,please contact us and we will do our best to make you satisfied, please do not leave a negative feedback before we resolve your problem. We are here to help and support our customers quickly. We guarantee that your issue will be solved quickly.
As long as you are happy with your purchase, please leave us a positive feedback.
Your feedback is very important to us as it affects our search placement on eBay. We will leave a positive feedback for you in return automatically once we receive your feedback.